DS-9500/DS-9000 - Add Worktype IDs to a DS-9500/9000

For this guide, Worktype IDs must have already been added to the Workflow section. See our Worktype IDs article for instructions.

To upload Worktype IDs to a device:

1. Go to: Tools > Options > Device > Worktype List

2. Select the Device Type and Device from the drop down menus

3. Click the Load button
   
   

   If more than one Worktype ID is being set to the device... One must be set as the Default Worktype ID.

4. Tick the “Prompt for Worktype ID...” tickbox.

5. Click Apply/OK to upload the settings to the device.